功能与特点：Function and characteristic:

◆日本三菱原装进口四伺服驱动，精度准确，机械传动部分减少，可有效减少机械的故障率。

◆ 整个控制系统采用欧姆龙PLC控制系统。

◆ 控制箱内接触器全部采用日本三菱品牌。

◆ 继电器、断路器采用法国施耐德品牌，光电和接近开关采用日本欧姆龙品牌。

◆ 底模，刀片采用日本钨钢制作（耐磨）。

◆ 整组钉头全部采用特殊钢制作，电脑数控精.密加工。

◆ 变换纸箱尺寸和调节纸箱钉距只需一分钟就可完成，大大节省时间操作方便。

◆ 前后双向挡板配置，可订无盖纸箱及小纸板箱、彩箱。

◆ 后段有自动计数功能，做好的成品张数可按设定数量（1-99）分叠送至输 送机械末端，方便打包捆扎。

◆ 前端送纸部自动计数，送纸台设有光电感应装置，送纸时自动上升。

◆ 给纸高度：590mm。

◆ 机械速度：600钉/分钟。

◆ 一台两用，可钉单片接钉纸箱，双片接钉纸箱，不规则纸箱。

◆ 尺寸采用全电动式控制，变换尺寸只需2-3分钟。

◆ 可钉加强钉，单钉，双排钉，一次完成。

◆ 送纸部自动计数，成品送出捆扎。

◆ 适用于中小型纸箱、装钉快速而省力。

◆ 调整钉距，使用电脑设定自动调钉距，钉距为30-120mm任意可调；

◆ 本机采用电脑荧幕显示故障说明。

◆ 自动送丝系统，无丝报警，20KG大盘扁丝，节约时间。

◆ 适用瓦楞纸板三层、五层、七层（七层时需特殊说明）。

◆ 本机采用四个伺服电机（即两个机头电机和两个控制钉距电机）。

◆ 整机电器隔离变压器保护功能；

◆ 装订方式:双直钉或单直钉/加强钉

◆ the original imported four servo drive from Mitsubishi, Japan, has accurate accuracy and reduced mechanical transmission part, which can effectively reduce the failure rate of machinery.

◆The whole control system adopts OMRON PLC control system.

◆ all contactors in the control box are made of Mitsubishi brand.

◆ the relay and circuit breaker are made of Schneider brand in France, and the photoelectric and proximity switches are made of OMRON brand in Japan.

◆ bottom mold and blade are made of Japanese tungsten steel (wear-resistant).

◆ the whole set of nail heads are made of special steel and processed by computer numerical control.

◆ it only takes one minute to change the size of the carton and adjust the nail distance of the carton, which greatly saves time and convenient operation.

◆ front and back two-way baffle configuration, can order no cover cartons, small cardboard boxes, color boxes.

◆ the rear section has the function of automatic counting. The finished products can be stacked to the end of the conveying machine according to the set quantity (1-99), which is convenient for packing and binding.

◆ the front end paper feeding section counts automatically, and the paper feeding table is equipped with photoelectric induction device, which rises automatically during paper feeding.

◆ paper feeding height: 590mm.

◆ mechanical speed: 600 nails / min.

◆ a dual-purpose machine, which can be used to nail single piece of paper box, double piece of paper box and irregular paper box.

◆ the size is controlled by full electric control, and it only takes 2-3 minutes to change the size.

◆ it can be nailed with reinforcing nails, single nails, double rows of nails, once completed.

◆ the paper feeding part counts automatically, and the finished products are sent out and bound.

◆ suitable for small and medium-sized cartons, fast and labor-saving.

◆ adjust the nail distance, use the computer to set the automatic nail distance, the nail distance is 30-120mm, which can be adjusted arbitrarily;

◆ this machine uses computer screen to display fault description.

◆ automatic wire feeding system, no wire alarm, 20kg large flat wire, saving time.

◆ applicable to three, five and seven layers of corrugated board (special instructions are required for seven layers).

◆ the machine adopts four servo motors (i.e. two head motors and two control nail pitch motors).

◆ protection function of electrical isolation transformer of the whole machine;

◆ binding method: double straight nails or single straight nails / reinforcing nails